News

  • The Role Of Plastic Strong Crusher In Waste Materials

    The Role Of Plastic Strong Crusher In Waste Materials

      In the past two years, my country's plastic machine industry has developed more and more rapidly, and the strong crusher industry has continuously improved its strength and core competitiveness through various channels such as industry exhibitions and scientific research cooperation, narrowing the... read more

    Oct 28,2022 News
  • The Reason Why The Vertical Injection Molding Machine Motor Starts

    The Reason Why The Vertical Injection Molding Machine Motor Starts

      The reason why the motor of the vertical injection molding machine cannot be started:   1. The motor does not turn and makes an abnormal sound at the same time, immediately turn off the emergency stop button, check whether the fuse is blown or loose, and then check whether the three-phase power su... read more

    Oct 21,2022 News
  • Five Hazards Of High Temperature Of Injection Molding Machine

    Five Hazards Of High Temperature Of Injection Molding Machine

      The moving parts with different thermal expansion coefficients in the hydraulic components are stuck due to their smaller fitting clearances, causing action failure, affecting the transmission accuracy of the hydraulic system, and resulting in poor working quality of the components.   Hazard two: ... read more

    Oct 14,2022 News
  • Under What Circumstances Must A Vertical Injection Molding Machine Be Used

    Under What Circumstances Must A Vertical Injection Molding Machine Be Used

      The rise of the plastics industry has driven the growth of vertical injection molding machinery. The total production value of vertical injection molding machines is refreshed every year. Under what circumstances must vertical injection molding machines be used?   The rise of the plastics industry... read more

    Oct 09,2022 News
  • Matters Needing Attention When Replacing Bearings With Strong Crusher

    Matters Needing Attention When Replacing Bearings With Strong Crusher

      A strong crusher's working environment is harsh, so the damage rate of parts is high. Some easy-to-wear parts are often damaged, which involves a replacement problem. Bearing is one of the wearing parts of jaw strong crusher, and replacement is also an inevitable problem. So what should we pay att... read more

    Sep 30,2022 News
  • How To Solve The Problem Of Overheating Of Hopper Plastic Dryer?

    How To Solve The Problem Of Overheating Of Hopper Plastic Dryer?

      Why does the hopper plastic dryer overheat? How do solve the problem of overheating and overheating?   The operation mode of the ordinary hopper plastic dryer is a fixed operation mode, which is continuously heated by the hot air pipe, and the fan continuously transports the hot air into the dryin... read more

    Sep 23,2022 News
  • The Working Principle Of The Bakelite Injection Molding Machine

    The Working Principle Of The Bakelite Injection Molding Machine

      The principle of the bakelite injection molding machine is similar to that of injection needles. It relies on the thrust of the extruder screw (or plunger pump) to inject molten plastic in a molten state (that is, a viscous flow state) into a closed mold core, and then dry and fix the plastic to o... read more

    Sep 16,2022 News
  • The Solution To The High-temperature Rise Of The Injection Molding Machine

    The Solution To The High-temperature Rise Of The Injection Molding Machine

      1. Reasons for the high-temperature rise of the injection molding machine   (1) The volume of the fuel tank is too small, the heat dissipation area is not enough, and the cooling device is too small in capacity.   (2) The quantitative pump oil supply system that selects the oil pump capacity accor... read more

    Sep 09,2022 News
  • Antifreeze Work Of Injection Molding Machine

    Antifreeze Work Of Injection Molding Machine

      Recently, affected by the strong cold air, most parts of our country have entered the coldest weather of the year. Everyone should take precautions against cold when going out. The low temperature brought by the cold air will last for some time, and it is necessary to pay attention to the antifree... read more

    Sep 02,2022 News
  • Maintenance And Care Of Strong Crusher In Long-term Use

    Maintenance And Care Of Strong Crusher In Long-term Use

      1. During the production process, the temperature rise of the bearing should be checked frequently. When the temperature rise exceeds 50°C, the machine should be shut down for inspection to find out the cause and eliminate the fault.   2. When the strong crusher is running, the transmission belt i... read more

    Aug 26,2022 News
  • Key Configuration Of Vertical Injection Molding Machine

    Key Configuration Of Vertical Injection Molding Machine

      The vertical injection molding machine is controlled by a microcomputer, and the power system is controlled by hydraulic transmission. The plastic material is heated by a heating ring in the material tube and generated by the rotation of the screw of the material pipe, and then pre-plasticized and... read more

    Aug 19,2022 News
  • Product Features Of Vertical Injection Molding Machine

    Product Features Of Vertical Injection Molding Machine

    The vertical injection molding machine is controlled by a microcomputer, and the power system is driven by hydraulic pressure. The product is obtained when the action is taken, and the machine can carry out the manual, semi-automatic, and fully automatic production. The advantages of vertical inject... read more

    Aug 12,2022 News