The production of vertical high-speed injection molding machines is a very complicated process. In the production process of the manufacturer, many temperatures need to be paid attention to. These temperatures have a great influence on the set of the product, which is a key factor. During the production process of the vertical high-speed injection molding machine, the following temperatures should be paid attention to material temperature, oil temperature, and mold temperature.
During the production process of the vertical high-speed injection molding machine, due to the continuous movement of the equipment, the hydraulic oil in the equipment will continue to rub against each other, generating more and more heat and increasing the oil temperature. Therefore, the oil temperature should be checked in time during the production process to keep the oil temperature at a normal temperature of around -45°C. If the oil temperature is too low or too high, it will have various effects on the pressure transmission of the system and affect normal production.
Material temperature is also a problem that needs attention, and material temperature is what we usually call barrel temperature, which generally depends on the material used and the specific requirements of the product. In the production process of the vertical high-speed injection molding machine, the temperature of the material changes continuously with the different production needs, so it needs to be adjusted in time, but the temperature cannot exceed the standard requirement. Additionally, period and material need to be considered.
Mold temperature is also an important reference temperature and parameter in the production of vertical high-speed injection molding machines. The mold temperature has a great influence on the shape of the product and whether it meets the standard. Therefore, when setting the mold temperature, product factors must be considered, not just temperature requirements, which will affect the normal and orderly progress of each process, and the standard rate of the produced products will be very low.