Plastic machinery is an important pillar of the development of the plastics industry and the foundation of the development of the plastics industry. Its position in the profession can be described as insignificant. It provides leading technical equipment for the plastic industry. Its development is ... read more
First check whether it can be vacuumed. If it can be vacuumed, then check whether the heating wire is heated. If the heating wire is not heated, check whether the contactor that controls the heating wire is sucked. (Or force the contactor to suck and see if the heating wire is hot) Replace the heati... read more
The working principle of the injection molding machine is similar to the syringe used for injection. It uses the thrust of the screw (or plunger) to inject the plasticized plastic in the molten state (that is, the viscous fluid state) into the closed mold cavity. The process of obtaining products af... read more
The plastic injection molding machine uses the thrust of the screw (or plunger) to inject the plasticized plastic in the molten state (that is, the viscous state) into the closed mold cavity, and obtain the product after solidification and shaping. Injection molding is a cyclic process. Each cycle m... read more
If you have never heard of a vacuum autoloader, then you should go buy one immediately. These types of vacuums are great for use by everyone and are the way to go if you are looking for a new machine to purchase. The main reason why they are so great is because there is no more mess that has to be d... read more
