What are the product characteristics and characteristics of vertical injection molding machine? The vertical injection molding machine is controlled by a microcomputer. The power system is driven by hydraulic pressure. The plastic is heated in the material tube by the electric heating ring and the material tube screw rotates to produce shearing. The pre-molten melt is injected into the cavity. After cooling, the mold is opened and the top is ejected. The product can be obtained after the action. The machine can be produced manually or semi-automatically.
Product characteristics of vertical injection molding machine:
1. Vertical column-less mold clamping, horizontal injection, the mold is open on three sides, the operation is more convenient and safer.
2. The injection pressure is large, controlled by the torque hydraulic motor, the screw torque is large, the pre-plastic amount is high, and the system pressure is controlled by the proportional valve.
3. Multi-stage pressure output, pressure response is sensitive, precise and accurate.
4. It can be installed with single and double slide plates and turntable system to improve production efficiency.
5. Suitable for the production of large-volume brain glue.
What are the product characteristics and characteristics of vertical injection molding machine?
Characteristics of vertical injection molding machine:
1. During small batch trial production, the mold structure is simple and the cost is low, and it is easy to unload.
2. It is easy to realize insert molding. Because the mold surface is facing up, the insert is easy to place. If the lower template is fixed and the upper template is movable, if the belt conveyor is combined with the manipulator, fully automatic insert molding can be easily achieved.
3. The weight of the mold is supported by the horizontal template to open and close up and down, and there will be no phenomenon that the template cannot be opened and closed like a horizontal machine due to the gravity of the mold. Help to maintain the accuracy of machinery and molds for durability.
4. The cavity of each plastic part can be taken out by a simple manipulator, which is beneficial to precision molding.
5. The general mold clamping device is open and easy to configure various types of automation devices, which is suitable for automatic molding of complex and delicate products.
6. The belt conveyor conveying device is easy to be installed in the middle of the mold, which is convenient for automatic production of molding.
7. It is easy to ensure the consistency of the resin fluidity and temperature distribution in the mold.
8. Equipped with rotating table, moving table and inclined table, it is easy to realize insert molding and in-mold combination molding.
9. Withstood the test of multiple earthquakes, the vertical machine has better seismic resistance than the horizontal machine due to its low center of gravity.
en
cn
