Web Menu

Product Search

Language

Share

News

news

Home / News
Company News Industry News

ZHENFEI 2020/03/20

Solution to the overflow of the injection molding machine head Nozzle overflow, also known as flashing, overflowing edge, piping, etc., mostly occurs at the opening and closing position of the mold. Such as: the parting surface of the Shandong injection molding m...

ZHENFEI 2020/03/14

Newly purchased injection molding machine debugging method How to debug a newly purchased injection molding machine: 1. Lifting and disassembling of injection molding machine: The small machine is integrated and does not need to be disassembled. When lifting,...

ZHENFEI 2020/03/06

Characteristics of all electric injection molding machine The all-electric injection molding machine meets the characteristics of reducing energy consumption. It is an injection molding machine that uses a servo motor to replace the original hydraulic device...

ZHENFEI 2020/02/18

Servo energy saving brings new opportunities to the injection molding industry With the increasing attention to the energy problem of injection molding machines, energy saving and consumption reduction are the basic national policy of the country, and cost reduction and efficien...

ZHENFEI 2020/02/10

How to solve the easy breakage of the injection molding machine rod Everyone knows that the tie rods (green columns) of ordinary shaft type (machine hinge) injection molding machines of injection molding machines are easier to break than the fully hydraulic tie rods. ...

ZHENFEI 2020/01/19

How to use BMC injection molding machine correctly Pay attention to point one, check whether the safety protection device of each part of the BMC injection molding machine is intact. When using BMC injection molding machine, please pay attention to po...

ZHENFEI 2020/01/11

Choice of injection molding machine Which aspects of the injection molding machine should be selected 1. Know your own production capacity and purchase an injection machine that matches the required production capacity. The equipment is...

ZHENFEI 2020/01/03

Performance advantages of vertical injection molding machines Performance advantages of vertical injection molding machines: Performance is a product condition that all products have, and the use of functions is very important for 80% of products. The same princ...

ZHENFEI 2019/12/27

Main structure of injection molding machine The injection molding machine is divided into plunger injection molding machine and screw injection molding machine according to the plasticization method. According to the transmission mode of the ma...

ZHENFEI 2019/12/20

Injection machine | Some knowledge of plastic machinery The perfection degree of plastic machinery of injection molding machine directly affects the quality, output and cost of plastic semi-products or products, so it must be able to adapt to changes in te...

ZHENFEI 2019/12/14

Control and use of hydraulic system of injection molding machine Hydraulic transmission of injection molding machine hydraulic system: The hydraulic oil is used as the working medium, and the mechanical energy of the prime mover is converted into the pressure energ...

ZHENFEI 2019/12/06

Working principle of injection molding system The working principle of the injection molding machine is similar to the injection syringe. It uses the thrust of the screw (or plunger) to inject the plasticized molten state (ie, viscous flow state)...